JETBIO 2020 Surface disinfection sprayer

REMINDER: "YOU CAN ONLY DISINFECT A CLEAN SURFACE".

The DISINFECTION stage: if you want disinfection that complies with current "BIOCIDE" standards.

The surfaces to be disinfected must be clean (i.e. previously cleaned with a non-disinfectant detergent) or with a very high temperature dry steam generator (our STEAMBIO 3000 / 185° C in the boiler and 100° C at the nozzle outlet). COVID19 is not resistant to temperatures above 70°C. The aim of this operation is to destroy and remove the "Biofilm" from the surface to be disinfected. Once this stage has been completed, you can move on to the Fogging stage.

The DECONTAMINATION stage is actually called PRE-DESINFECTION:

It is not necessary to clean beforehand, but this operation will not last and will need to be repeated very regularly.

What is disinfection by fogging?

PROTOCOL AND IMPORTANT RECOMMENDATIONS

1. Position the machine in the room, adjust the flow rate if necessary and start it up.
2. Aim the nozzle at a 45° angle towards a wall to create a circular vortex effect or use our 360° Rotating Table.
3. The average contact time is 20 minutes.
4. Ventilate the room for 10 to 15 minutes after fogging to bring the oxygen peroxide concentration back down to a low level (1 ppm of H202).
5. With our solution, a 100m3 room will be fogged for 10 minutes + 20 minutes contact time + 10 minutes aeration, i.e. the room will be immobilised for : 40 minutes

• CAUTION: All Disinfectant products "BIOCIDE is considered as Dangerous and should therefore be handled with care.
• PPE is mandatory Coveralls + gloves + goggles + masks (FFP3 if you have to enter a room where fogging is taking place or has just taken place).

Technical characteristics of JETBIO 2020

• Weight : 7.5 kg
• Power supply/Power : 230 V / 1920 W
• VORTEX technology : Electric scissor-type turbine + vacuum venturi
• Product flow : Adjustable from 16 to 300mL/m
• Max. local volume : 2000m3
• Max. diffusion time : unlimited
• Timer : Digital with memory and automatic
• Hull : 316 L stainless steel
• Fittings: 304 stainless steel
• Tank capacity : 6.5 litres of disinfectant

Which product should be used with JETBIO 2020 to destroy COVID19?

Our JETBIO 2020 aerial surface disinfection device can be used with APABIOOur organic and ecological 100% disinfectant based on peracetic acid and hydrogen peroxide. Approved and standardised at French and European level.

Video demonstration of our disinfection equipment: JETBIO 2020

Contact us for more information