JETBIO BP - Covid disinfection nebuliser

REMINDER: "YOU CAN ONLY DISINFECT A CLEAN SURFACE".

The DISINFECTION stage: if you want disinfection that complies with current "BIOCIDE" standards.

The surfaces to be disinfected must be clean (i.e. previously cleaned with a non-disinfectant detergent) or with a very high temperature dry steam generator (our STEAMBIO 3000 / 185° C in the boiler and 100° C at the nozzle outlet). COVID19 is not resistant to temperatures above 70°C. The aim of this operation is to destroy and remove the "Biofilm" from the surface to be disinfected. Once this stage has been completed, you can move on to the Fogging stage.

DECONTAMINATION is actually called PRE-DESINFECTION:

It is not necessary to clean beforehand, but this operation will not last and will need to be repeated very regularly.

Understanding the difference between disinfection, decontamination and sterilisation

Understanding disinfection by fogging?

PROTOCOL AND IMPORTANT RECOMMENDATIONS

1. Position the machine in the room, adjust the flow rate if necessary and start it up.
2. Then turn the nozzle at 45° towards a wall to create a circular vortex effect.
3. Contact time to be defined according to the volume to be disinfected. 30 minutes on average.
4. Ventilate the room for 10 to 15 minutes after fogging to bring the oxygen peroxide concentration back down to a low level (1 ppm of H202).
5. A 100m3 room will be fogged for 10 minutes, plus 10 minutes of contact time and finally 10 minutes of aeration, i.e. the room will be immobilised for 10 minutes: 30 minutes

• CAUTION: All Disinfectant products "BIOCIDE is considered as Dangerous and should therefore be handled with care.
• PPE is mandatory Coveralls + gloves + goggles + masks (FFP3 if you have to enter a room where fogging is taking place or has just taken place).

Technical characteristics of the JETBIO BP disinfection nebuliser Covid

• Weight : 3.5 kg
• Power supply/Power : 230 V / 1120 W
• VORTEX technology : Electric scissor-type turbine + vacuum venturi
• Product flow : Adjustable from 1 to 300mL/m (average flow rate 15 ml/minute)
• Max. local volume : 1000m3
• Max. diffusion time : 30 minutes
• Timer : Digital with memory and automatic
• Hull : HDPE Plastic Medical
• Fittings: 304 stainless steel
• Tank capacity : 5 litres of disinfectant
• Download the documentation in PDF format

The product to use with JETBIO BP to combat COVID19?

Our aerial surface disinfection device JETBIO BP, Covid disinfection nebuliser, is used with APABIOOur organic and ecological 100% disinfectant based on peracetic acid and hydrogen peroxide. Approved and standardised at French and European level.

Contact us for more information or a quote