SECURE PAYMENT - PAYMENT IN 3 TIMES WITHOUT CHARGE
SECURE PAYMENT - PAYMENT IN 3 TIMES WITHOUT CHARGE

JETBIO BP - Covid-19 disinfection nebulizer

220,00 WITHOUT TAXES

JETBIO BP - Disinfection by foggingThe couple JETBIO BP and APABIO are used to disinfect and destroy the COVID19 on the surfaces of a room without human intervention. Fully automatic, simply position it in the room, set the timer and switch it on!

  • JETBIO can handle volumes from 10m3 to 1000m3
  • Unrivalled power: capable of disinfecting a volume of 100m3 in just 10 minutes!
  • Timer: No
  • Mobile, light and very easy to use device
  • Bactericide - Virucide COVID19-Sporicide - Fungicide - Levuricide
SKU: 102-004B Category:
Description
Further information
Reviews (0)

Covid disinfection nebulizer

The JETBIO Basic Plastic Special "COVID19" is the essential disinfection nebulizer

Disinfection Nebulizer JETBIO BP allows to disinfect and destroy COVID19 on the surfaces of a room without human intervention.

Very easy to use, simply position the disinfection device in the room and switch it on!

  • Unrivalled power: capable of disinfecting a volume of 100m3 in just 10 minutes!
  • JETBIO BP can handle a volume of 10 m3 to 1000 m3
  • Timer: No
  • Mobile, light and very easy to use fogger device with APABIO
  • Ensures Disinfection Bactericidal - Virucidal (COVID 19) according to Standard EN 14476 + A1 - Sporicidal - Fungicidal - Yeastkiller.

Advantages of the aerial surface disinfection nebulizer

Dry nebulisation is a process that allows a room to be saturated with a disinfectant.

In doing so, all surfaces in contact with the air will be treated without human intervention.

Steps to successful Covid-19 disinfection with JETBIO BP and APABIO

REMINDER: "YOU CAN ONLY DISINFECT A CLEAN SURFACE."

The DISINFECTION step: if you want to disinfect in accordance with the current "BIOCIDE" standards.

It is mandatory that the surfaces to be disinfected must be clean (i.e. previously cleaned with a detergent (not disinfectant) or with a dry and very high temperature steam generator (our STEAMBIO 3000 / 185° C in boiler and 100° C at the nozzle outlet). The COVID19 does not resist to a temperature higher than 70° C. The purpose of this operation is to destroy and remove the "Biofilm" from the surface to be disinfected. Once this step has been completed, you can proceed to the Misting step.

DECONTAMINATION is actually called PRE-DESINFECTION:

It is not necessary to clean beforehand, but this operation will not have any persistence in time and will have to be repeated very regularly.

Understanding The difference between disinfection, decontamination and sterilization

Understanding mist disinfection?

PROTOCOL AND KEY RECOMMENDATIONS

  1. Position the machine in the room, adjust the spread rate if necessary and switch on.
  2. Then orient the nozzle at 45° to a wall or partition to create a circular "Vortex" effect.
  3. Contact time to be defined according to the volume to be disinfected. 30 minutes on average .
  4. Ventilation of the room after fogging for 10 to 15 minutes to return to a low concentration of oxygen peroxide (1ppm of H202).
  5. A room of 100m3 will be fogged for 10 minutes, plus the contact time of 10 minutes and finally the ventilation of 10 minutes, i.e. the room will be immobilized for: 30minutes.
  • WARNING: Any "BIOCIDE" disinfectant product is considered to be Dangerous and should be handled with care.
  • PPE is mandatory: Overalls + gloves + goggles + Masks (FFP3 if you have to enter the room where a misting is in progress or has just occurred)

Technical characteristics of the disinfection nebulizer JETBIO BP

  • Weight: 3.5 kg
  • Power supply/Power: 230 V / 1120 W
  • VORTEX Technology: Electric scissor turbine + vacuum venturi
  • Fluid Flow : Adjustable from 1 to 300mL/m (average flow rate 15 ml/minute)
  • Max. local volume : 1000m3
  • Max. diffusion time : 30 minutes
  • Timer: Digital with memory and automatic
  • Shell: HDPE Medical Plastic
  • Fittings: Stainless steel 304
  • Tank capacity: 5 litres of disinfectant
  • Download the documentation in PDF

The product to use with JETBIO BP to control COVID19?

Our airborne surface disinfection device JETBIO BP is used with APABIOOur 100% organic and ecological disinfectant based on peracetic acid and hydrogen peroxide. Approved and standardized at French and European level.

Contact us if you would like more information or an estimate.

Weight 5 kg
Dimensions 43 × 28 × 43 cm

Notice

There's no notice yet.

Be the first to leave your opinion on "JETBIO BP - Covid-19 disinfection nebuliser"

Your e-mail address will not be published.

ConceptClim - Illustration for August 2022 Closure