The couple JETBIO and APABIO allow VIDOC19 to be disinfected and destroyed on room surfaces without human intervention. Fully automatic, simply position it in the room, set the timer and turn it on!
The JETBIO Spray allows to disinfect and destroy the COVID19 of the surfaces of a room without human intervention. Fully automatic, simply position the disinfection device in the room and turn it on!
Dry misting is a process that allows a room to be saturated with a disinfectant: all surfaces in contact with the air are treated without human intervention.
REMINDER: "YOU CAN ONLY DISINFECT A CLEAN SURFACE."
It is mandatory that the surfaces to be disinfected must be clean (i.e. previously cleaned with a detergent (not disinfectant) or with a dry and very high temperature steam generator (our STEAMBIO 3000 / 185° C in boiler and 100° C at the nozzle outlet). The COVID19 does not resist to a temperature higher than 70° C. The purpose of this operation is to destroy and remove the "Biofilm" from the surface to be disinfected. Once this step has been completed, you can proceed to the Misting step.
It is not necessary to clean beforehand, but this operation will not have any persistence in time and will have to be repeated very regularly.
Our JETBIO 2020 airborne surface disinfection unit can be used with APABIOOur 100% organic and ecological disinfectant based on peracetic acid and hydrogen peroxide. Approved and standardized at the French and European level.